MSD Ignition 7AL-3 Ignition Control
Features a host of the most popular drag racing accessories. A built-in Three Step Rev Control provides three different rpm limits that can be used for the burnout, holeshot and top end overrev protection. There is also a Multi-Step Retard with four different modules that can be activated at different times. Four 0° modules and a 2°, 3° and 4° module are supplied. Many race engines with crank trigger systems or locked-out distributors will benefit from the 7AL-3's built-in adjustable Start Retard will retard the timing 25° allowing the engine to turn over easier. When the engine starts, the timing will automatically go back to its mechanical setting. One last option is an RPM Activated Switch that allows you to activate a solenoid or shift light at an adjustable rpm. When the engine hits the desired rpm the RAS circuit provides a ground to the component to activate it. Vibration mounts, wires and detailed instructions are supplied.
• Spark Energy: 160 mj
• Primary Output Voltage: 570
• Secondary Voltage Output: 50,000
• 20° of Spark Duration
• Current Draw Per 6,000 RPM: 6 Amps
• Built-In 3-Step Rev Control
• Multi-Step Retard
• Adjustable Start Retard
• RPM Activated Switch
Part Type: Ignition Control
Application: Universal Drag Race 4, 6, & 8 Cylinder, equipped with 12 volt
Ignition Box Output: Capacitive Discharge
Circuitry: Analog
PC Programmable: No
Data Acquisition: No
USB Interface: No
Timing Advance Capability: No
Rev Limiter: Yes, 3 Step (requires RPM modules)
Timing Retard: 4 Stage Multi-Step (requires RPM modules)
RPM Activated Switch: Yes
Start Retard: Yes, adjustable
General Purpose Input/Output Terminals: No
Multiple Spark Duration: 20°
Spark Energy: 160 Millijoules
Voltage Primary Output (Into Coil): 570 Volts
Voltage Secondary Output (Coil Output): 50,000 Volts
Operating Voltage: 12-18 Volt DC
Operating Current Amp per RPM: 1 amp/1,000 RPM
RPM with 14.4 Volt: 14,000
Coil Included: No
Suggested Coils: MSD8201, MSD8251, MSD8261
Ignition Box Color: Black
Ignition Box Length: 8 in.
Ignition Box Width: 3.75 in.
Ignition Box Height: 5.75 in.
Manufacturer: MSD Performance
Manufacturer's Part Number: 7330
Weight: 4.4 lbs.
Warranty: LIMITED WARRANTY- MSD warrants this product to be free from defects in material and workmanship under its intended normal use, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. Intended normal use means that this item is being used as was originally intended and for the original application as sold by MSD. Any modifications to this item or if it is used on an application other than what MSD markets the product, the warranty will be void. If found to be defective as mentioned above, it will be repaired or replaced at the option of MSD. Any item that is covered under this warranty will be returned free of charge using Ground shipping methods. In no event shall MSD or its suppliers be liable for special or consequential damages.
Quantity: Sold as Each
Note: MSD 7 Series Ignitions are not compatible with distributorless systems |